II
111th CONGRESS
2d Session
S. 3043
IN THE SENATE OF THE UNITED STATES
February 25, 2010
Mrs. Gillibrand (for herself, Mr. Kaufman, Ms. Snowe, Ms. Cantwell, Ms. Klobuchar, and Mrs. Murray) introduced the following bill; which was read twice and referred to the Committee on Health, Education, Labor, and Pensions
A BILL
To award planning grants and implementation grants to State educational agencies to enable the State educational agencies to complete comprehensive planning to carry out activities designed to integrate engineering education into K–12 instruction and curriculum and to provide evaluation grants to measure efficacy of K–12 engineering education.
Short title
This Act may be cited as the
Engineering Education for Innovation
Act
or the E2
for Innovation Act
.
Findings
Congress finds the following:
There is a national concern that the Nation’s preeminence in science and innovation is eroding. According to the National Science Board’s 2010 Science and Engineering Indicators, only 5 percent of college graduates in the United States major in engineering, compared with 12 percent of European students and 20 percent of those in Asia. The report also notes that the performance of elementary and secondary school students in the United States lags behind many nations on international assessments of mathematics and science.
While women earn 58 percent of all bachelor’s degrees, they constitute only 18.5 percent of bachelor’s degrees awarded in engineering.
African-Americans earn only 4.6 percent of bachelor’s degrees awarded in engineering and Hispanics earn only 7.2 percent.
The introduction
of engineering education has the potential to improve student learning and
achievement in science and mathematics, increase awareness about what engineers
do and of engineering as a potential career, and boost students' technological
literacy, according to a new report, Engineering in K–12
Education
from the National Academy of Engineering (NAE) and the
National Research Council (NRC).
The report described in paragraph (4) also identifies the following 3 core principles for K–12 engineering education:
Emphasize engineering design process.
Incorporate important and developmentally appropriate mathematics, science, and technology knowledge and skills.
Promote engineering habits of mind including systems thinking, creativity, collaboration, communication, and attention to ethical considerations.
While exposure to formal engineering education has increased dramatically over the past 15 years, reaching several million K–12 students, most students in the United States have never experienced an engineering course or lesson.
There is also a lack of diversity in these existing K–12 engineering education opportunities. The number of girls and underrepresented minorities participating in K–12 engineering education does not correspond to their proportion of the general population.
Only a handful of States have integrated engineering into their core academic K–12 standards.
K–12 engineering education in the United States is supported by a relatively small number of curricular and teacher professional development programs.
While science, technology, engineering, and mathematics education is viewed as a national education policy, often the implementation of policies and initiatives focuses exclusively on mathematics and science and overlooks the engineering and technology education components.
Schools, policy
makers, and other stakeholders often narrowly refer to the term
technologically literate as the ability to use educational
technologies. Although educational technology is important, it is far from the
only type of technology we depend on in a modern society. In 2006, the National
Academy of Engineering and the National Research Council's report,
Technically Speaking
, outlined a broader view of
technological literacy
, one more consistent with how scientists,
engineers, and technologists see the world. In this view, technological
literacy includes—
knowledge of technology, the engineering design process, and impacts on society;
critical thinking and decisionmaking weighing benefits, risks, costs, and tradeoffs; and
capability to use a variety of technologies, apply the design process, fix simple technological problems, and obtain and understand information about technological issues.
The Standards for Technological Literacy, developed by the International Technology Education Association and passed by a formal review by the National Academy of Engineering and the National Research Council, closely align with the Academies' concept of technological literacy in paragraph (11).
To support an innovation economy and maintain our country’s vitality and security, we must expand students’ understanding of technology and engineering and widen the pipeline to careers in these fields so that a diverse array of talented students can pursue them.
The Federal Government has an interest in expanding K–12 engineering and technology education. Testing of technological design skills will be assessed as part of the new National Assessment of Educational Progress Science 2009 assessment to be given to students throughout the United States. The National Assessment Governing Board is currently developing a National Assessment of Educational Progress Technological Literacy probe study to be administered in 2012 that will assess design and systems, information and communication technology, and technology and society.
To further expand K–12 engineering education, this Act seeks to support planning and implementing grants for educational agencies to invest in programs and activities to integrate engineering education into K–12 instruction and curriculum and to fund research on, and evaluation of, such efforts.
Definitions
In this Act:
High-need local educational agency
The term high-need local educational agency means a local educational agency—
that serves not fewer than 10,000 children from families with incomes below the poverty line; or
for which not less than 20 percent of the children served by the agency are from families with incomes below the poverty line; and
for which there is a high percentage of teachers not teaching in the academic subjects or grade levels that the teachers were trained to teach; or
for which there is a high percentage of teachers with emergency, provisional, or temporary certification or licensing.
State educational agency
The term State educational agency includes the State educational agency in a State in which the State educational agency is the sole educational agency for all public schools.
Technological literacy
The term technological literacy—
means the capacity to use, understand, and evaluate technology as well as to apply concepts and processes to solve problems and reach one’s goals; and
encompasses the 3 areas of technology and society, engineering design and systems, and information and communication technology (as considered by the National Assessment Governing Board in 2010).
Planning grants
Program authorized
In general
The Secretary of Education, in consultation with the Director of the National Science Foundation and other relevant heads of Federal agencies, is authorized to award planning grants to State educational agencies to enable such agencies to complete comprehensive planning to carry out activities designed to integrate engineering education into K–12 instruction and curriculum.
Grant period
A planning grant awarded under this section shall be for a period of not more than 2 years.
Nonrenewability
The Secretary of Education shall not award a State educational agency more than 1 planning grant under this section.
Maximum grant amount
A planning grant awarded under this section shall not exceed $1,000,000 over the period of the grant.
Reservation for small states
In general
Except as provided in subparagraph (B), the Secretary of Education shall reserve not less than 15 percent of the funds appropriated to carry out this section for each fiscal year to award grants under this section to States with populations of less than 2,600,000 on the date of enactment of this Act.
Waiver
The Secretary of Education may waive the 15 percent requirement under subparagraph (A) after notifying Congress of such intention.
Application
In general
Each State educational agency desiring a planning grant under this section shall submit an application to the Secretary of Education at such time, in such manner, and accompanied by such information as the Secretary of Education may require.
Application contents
Each application described in paragraph (1), at a minimum, shall—
include a description of how the State educational agency proposes to use the planning grant funds to develop a plan designed to integrate engineering education into K–12 instruction and curriculum;
describe the roles and responsibilities of the partners participating in the planning under this section;
provide a budget for the use of the planning grant funds; and
provide such additional assurances and information as the Secretary of Education determines to be necessary.
Partnership
A State educational agency receiving a planning grant under this section shall complete comprehensive planning to carry out activities designed to integrate engineering education into K–12 instruction and curriculum in coordination with partners, including the following:
The Governor of the State or the designee of the Governor.
Not less than 1 faculty member from a school of engineering at an institution of higher education located in the State.
Not less than 1 faculty member from a school of education at an institution of higher education located in the State.
Not less than 1 public elementary school administrator employed in the State.
Not less than 1 public elementary school teacher employed in the State.
Not less than 1 public secondary school administrator employed in the State.
Not less than 1 public secondary school engineering or technology teacher employed in the State.
Not less than 1 representative of the science, technology, engineering, and mathematics business community in the State.
Not less than 1 representative from an informal science education center, if available, or a nonprofit organization with a demonstrated history of working in engineering education.
Not less than 1 representative from a professional engineering society or an academy of science with a chapter or other presence in the State.
Any additional representatives identified by the State educational agency who possess an expertise in developing high-quality K–12 engineering education materials and resources.
Required activities
A State educational agency receiving a planning grant under this section shall use the planning grant funds to carry out each of the following activities:
Review
The State educational agency shall review resources and programs across the State educational agency and its partners that are relevant to the objectives of the grant, and coordinate any new plans and resources under this section with such existing resources and programs.
Plan
The State educational agency shall develop an implementation plan to achieve the objective of integrating engineering education into K–12 instruction and curriculum. The plan shall include a description of how the State educational agency will carry out the following:
Set intermediate and long-term measurable goals.
Develop and implement a coherent plan for achieving the goals, including the following core set of activities:
An analysis of the State's existing K–12 content standards and assessments to determine—
the extent to which they address the integration of engineering education into K–12 instruction and curriculum; and
the extent to which they align with workforce and postsecondary expectations.
An analysis of the State's existing K–12 engineering education curricula, which shall include the development of a baseline analysis of key indicators that measure—
the number and diversity of students who are exposed to this curricula, including populations underrepresented in engineering fields, for example, girls and underrepresented minorities; and
the effectiveness of the curricula at improving student learning, including—
increasing understanding of engineering;
increasing science, technology, engineering, and mathematics career aspirations;
increasing technological literacy skills; and
increasing student achievement in science, technology, engineering, and mathematics subjects for all students.
An analysis of the State's K–12 engineering and technology education teaching workforce, which shall include the development of a baseline analysis of key indicators that measure—
the number of K–12 teachers who received any certificates or credentials in engineering or technology education, including the number who received professional development in engineering education;
the number and types of pre-service, induction, and professional development engineering and technology education programs; and
the effectiveness of the identified preservice, induction, and professional development engineering and technology education programs as they relate to—
increasing understanding of engineering;
increasing science, technology, engineering, and mathematics career aspirations;
increasing technological literacy skills; and
increasing student achievement in science, technology, engineering, and mathematics subjects.
Create a plan for ongoing collection and analysis of data on outcomes, including progress toward outcomes.
Special rule
In the event a State educational agency declines or does not submit an application under this section, the Secretary of Education shall provide for another entity or consortium, with the capacity to carry out the activities under this section, in partnership with the partners listed in subsection (c), in such State, to submit an application.
Authorization of appropriations
There are authorized to be appropriated to carry out this section $12,500,000 for each of fiscal years 2011 through 2015.
Implementation grants
Program authorized
In general
The Secretary of Education, in consultation with the Director of the National Science Foundation and other relevant heads of Federal agencies, is authorized to award grants to State educational agencies to pay the Federal share of the cost of implementing innovative, integrative engineering education initiatives into K–12 instruction and curriculum.
Partnership
A State educational agency receiving an implementation grant under this section may partner with such entities (including the entities listed in section 4(c)) that the State chooses in order to carry out the activities described in this section.
Minimum amount
The Secretary of Education shall award a grant under this section in an amount that is not less than $10,000,000, or a comparably sufficient amount relative to the amounts appropriated to carry out this section. Such amount shall be pro-rated over the period of the grant.
Duration and renewal
Duration
The Secretary of Education shall award grants under this section for not more than 4 years.
Renewal
The Secretary of Education may renew a grant awarded under this section subject to the progress of the State educational agency in meeting the benchmarks described in subsection (h).
Priority
In general
In awarding grants under this section, the Secretary of Education shall give priority to State educational agencies that submit an application under subsection (e) that demonstrates—
satisfaction of the required activities or comparable activities under section 4(d), as determined by the Secretary;
that a significant percentage of persons served by the grant will be students from population underrepresented in engineering fields; and
that the State’s partners under subsection (a)(2) agree to pay a portion of the non-Federal share costs, provided in cash or in-kind, of the programs and activities carried out under the grant.
Small state guarantee
In general
In each fiscal year in which a grant is awarded under this section, the Secretary of Education shall ensure that not less than 1 grant be awarded to a State with a population of less than 2,600,000 on the date of enactment of this Act.
Waiver
The Secretary of Education may waive the requirement under subparagraph (A) after notifying Congress of such intention.
Applications
A State educational agency that desires to receive a grant under this section shall submit an application to the Secretary of Education at such time, in such manner, and containing such information as the Secretary of Education may require. Each such application shall include a description of how the State educational agency will integrate engineering education into K–12 instruction and curriculum through programs and activities described in subsection (f).
Uses of funds
A State educational agency that receives a grant under this section shall use the grant funds to pay the Federal share of carrying out the following programs and activities in collaboration with the State’s partners under subsection (a)(2):
Implementing challenging academic content standards, achievement standards, and curricula frameworks that include engineering.
Developing new or obtaining effective curricula in engineering education.
Designing and implementing engineering education assessment items and tools.
Developing or improving elementary and secondary teacher preservice, induction, and professional development engineering and technology education programs, including those that lead to a certificate or other credential in engineering or technology education.
Recruiting qualified teachers to provide engineering education for high-need local educational agencies and high-need schools.
Establishing distance learning modules for teachers or students in engineering education.
Creating online engineering education tools that are widely accessible.
Investing in after-school engineering education programs.
Technical assistance
The Secretary of Education is authorized to reserve not more than 1 percent of the amounts available to carry out this section to provide technical assistance, directly or by grant or contract with nonprofit organizations with demonstrated expertise in designing, implementing, or evaluating relevant programs, in order to help State educational agencies prepare for, qualify for, apply for, and maintain a grant under this section.
Benchmarks
Benchmarks
Each State educational agency desiring a grant under this section shall—
develop quantifiable benchmarks for the activities supported under the grant, which shall include increasing student achievement in science, technology, engineering, and mathematics subjects, and may include—
increasing student knowledge and competency of grade-appropriate engineering design skills;
increasing the number of students who are taught engineering education;
increasing the number of educators who are prepared to teach engineering education; and
increasing the number and diversity of students who plan to enroll in postsecondary engineering courses and pursue an engineering degree; and
submit the benchmarks for approval to the Secretary of Education in order to receive grant funds under this section.
Reports
Each State educational agency receiving a grant under this section shall—
annually measure and report to the Secretary of Education the progress of the State educational agency in achieving the benchmarks developed under paragraph (1); and
collect and report data of those served by the grant relating to the student benchmarks, disaggregated by race, ethnicity, gender, disability status, migrant status, English proficiency, and status as economically disadvantaged, except that such disaggregation shall not be required in a case in which the number of students in a category is insufficient to yield statistically reliable information or the results would reveal personally identifiable information about an individual student.
Guidance
The Secretary of Education shall provide guidance regarding acceptable data sources and methodologies for—
establishing baselines and performance benchmarks; and
measuring progress by State educational agencies receiving such grants.
Non-Federal share; supplement, not supplant
Non-Federal share
In general
A State educational agency that receives a grant under this section shall provide the non-Federal share of the costs of the programs and activities described in subsection (f) that are carried out under the grant. The amount of the non-Federal share under this section for a fiscal year shall be not less than 50 percent. The non-Federal share may be in cash or in-kind, and may be provided from local resources, contributions from private organizations, contributions from the State’s partners under subsection (a)(2), or a combination of such sources.
Financial hardship waiver
The Secretary of Education may waive or reduce the non-Federal share of a State educational agency that has submitted an application for a grant under this section if the State educational agency demonstrates a need for such waiver or reduction due to extreme financial hardship.
Supplement, not supplant
Grant funds provided under this section shall be used to supplement, and not supplant, any other Federal or State funds otherwise available to carry out the activities described in this section.
Special rule
In the event a State educational agency declines or does not submit an application under this section, the Secretary of Education shall provide for another entity or a consortium, with the capacity to carry out the activities under this section in such State, to submit an application.
Authorization of appropriations
There are authorized to be appropriated to carry out this section $125,000,000 for each of fiscal years 2012 through 2015.
Research and evaluations
In general
The Institute of Education Sciences shall support, directly or through grants or contracts, research on engineering education and evaluation of the grants awarded under this Act, including studies and evaluations that—
assess the effectiveness of the programs and activities carried out by each State educational agency receiving a grant under section 5 in—
improving student achievement in science, technology, engineering, and mathematics subjects;
improving student understanding of engineering;
enhancing technological literacy of students;
increasing numbers and diversity of students with science, technology, engineering, and mathematics career aspirations; and
increasing the supply of engineering and technology education teachers;
assess how the programs and activities carried out by each State educational agency receiving a grant under section 5 can be replicated by a variety of State educational agencies and local educational agencies;
assess how the programs and activities carried out by each State educational agency receiving a grant under section 5 lead to students developing engineering design ideas, practices and habits of mind over time, and the types of conditions necessary to support these developments;
identify and assess how science inquiry and mathematical reasoning can be connected to engineering design in K–12 curricula and teacher professional development; and
include any other information or assessments the Secretary of Education may require.
Dissemination
The Secretary of Education shall, based on the results of each evaluation completed under subsection (a), disseminate information and analysis to the public, and provide technical assistance to State educational agencies, on best practices and promising innovations in the field of K–12 engineering education.
Authorization of appropriations
There are authorized to be appropriated to carry out this section $5,000,000 for each of fiscal years 2013 through 2015.