Mr. Chairman, the person who has been forgotten in all the debate that has been happening is the American worker. I can remember when I was a little kid, my dad used to pack his lunch box, a black tin box with a round top, with a salami…
Mr. Chairman, the person who has been forgotten in all the debate that has been happening is the American worker. I can remember when I was a little kid, my dad used to pack his lunch box, a black tin box with a round top, with a salami sandwich, a piece of fruit and a thermos of coffee, as he would rise early in the morning, go off to work at the factory, and come back with a sense of satisfaction that he had made something with his hands.
And that perhaps is the emblem of the American worker, somebody who actually worked in a factory and then became a master meat cutter in his grocery store, master restaurateur, and at the same time was an expert carpenter and cabinetmaker. He was a person who could do marvelous things with the hands that God gave him.
That perhaps also is the picture of the American that we are not examining as we take a look at this entire cap-and-trade system. Because after all, it is the American worker who is going to be disadvantaged in many ways because of this theory that the majority wants to impose upon the American family, which according to the nonpartisan Congressional Budget Office, would spike the cost of energy for the average American family of somewhere between $700 and $2,200 a year. So we start with the fact that the American worker is going to be paying a lot more for his or her energy at home before he leaves and goes off to the factory.
Once he gets to the factory, exactly what is going to happen? Well, the factory is already under tremendous competition, competition domestically because of high productivity of the American manufacturers and competition because of offshore, because of countries that don't have OSHA standards, that have very few environmental standards, who care less about the safety of the worker and more about shipping that product to the United States.
So we start with the distinct disadvantage already in the manufacturing sector. How much more can the American worker take? How much more can the owner of that factory take?
I assembled this past week--in fact, yesterday--in the congressional district that I represent, a congressional district that has in its largest county an over 25 percent manufacturing base--55 or 60 small manufacturers. I laid out to them this cap-and-trade system and exactly what it would mean to them as manufacturers. The looks upon their faces were nothing less than startling because we start with the proposition that 535 people in Washington, D.C., suddenly wake up in
the morning and decide, well, America should go into the green business, that America should get involved in the energy-saving business as if the American manufacturer and his worker have been on the sidelines, doing nothing.
You have great manufacturers out there, like the Perks family from Rockford, Illinois. The Perks family has been around for three generations now, involved in combustible burners. Their goal has always been to make the most efficient combustible burner possible, and they lead the world in that technology. They just didn't wake up one morning and say, ``We should start saving energy.'' That's what productivity is all about. That's what the American manufacturer is all about--to be giving him and the small inventor the opportunity to be able to go out and to make products--to make them run faster, quicker, and leaner.
The Federal Government didn't invent the term ``lean manufacturing.'' The Federal Government didn't come up with ISO standards of excellence and productivity. The Federal Government does more to hinder the innovation ability and the productivity and the energy savings of the American manufacturer than it does to help them out. Take, for example, all of the American machinery in Harvard, Illinois. There is an extraordinary patent on being able to run hydraulics on an as per unit. It gives a shot of power to move that hydraulic pump, and then the unit shuts off, saving between 60 to 80 percent of the energy costs versus a machine that runs all the time.
No one in Washington called the people back home in Harvard, Illinois, and said, We have this great idea for you. The people in Washington are calling the people whom I represent and are saying, I've got news for you. I don't have new innovations for you. I don't have new technologies for you. I have a new task that's going to make you less competitive with the world, the so-called ``cap-and-trade tax,'' because the people in this body and in the other body are going to say that we are manufacturers and that we know everything about manufacturing as we sit here in our pin-striped suits and don't even know what the sweet smell of machine oil is because most of them have never been in a factory in their lives. They're going to tell our American manufacturers how to run their factories.
As I talked to our American manufacturers yesterday, 55 or 60 of them, several have places where they're already manufacturing for domestic consumption in China and in Mexico. Their faces spoke the results. If it's going to become so much more expensive to manufacture in the United States, we'll just do more manufacturing in Mexico and in China. Do you know what, Mr. Speaker? The cost of shipping finished items from China to the United States will be less than the cost of the increase in power for people to make their products under the new cap- and-trade bill. This is absolute lunacy to be able to subject the American manufacturer and the worker to this, the worker who gets up at the crack of dawn every morning, who packs his lunch box and goes off to work and gets in his old car and puts in 8 or 10 or 12 hours a day, working to support his family, working to get the kids through college, working to pay the mortgage. All of a sudden, Congress says, You don't know what you're doing. You don't know how to run your factory.
All we have to do is look at what happened in Europe. Look at the famous cap-and-trade system in Europe. Now, I don't usually look to the Europeans for examples except when they fail. In this case, the cap- and-trade system, Mr. Speaker, has been a complete and total failure. Why is that? Well, it's because you go across the Strait of Gibraltar, into Morocco and northern Africa, and you see countries that are not locked into the same type of system of control emissions. In fact, Kollo Holding in the Netherlands makes a silicon carbide. According to an article in The Washington Post, it's used as an industrial abrasive. It's the finest factory that you could find, the best in ecological construction, the finest in meeting the most stringent requirements to reduce the emissions of carbon. They're in big trouble, huge trouble, because right across in Morocco you will find a competitor--and in China--that can make it cheaper and that can ship it to Europe.
So what happens to the brave soul in Europe who complies with their ill-fated cap-and-trade system? He'll probably go out of business. That's exactly what happens. What's going to happen to the United States? There will be a southern movement to Mexico as American manufacturers will be making more of their products in Mexico and shipping it across the border because it will be a lot cheaper as they won't be sacked with a cap-and-trade system.
If you take a look at the Government Accountability Office report of December of 2008, this is their own organization that sets up standards by which to make measurements of efficiencies in different programs. The Government Accountability Office says there are better, less expensive and more direct methods to accomplish the goal of reducing emissions. Well, that's interesting. What are those? Well, perhaps someone ought to take a look at what the American manufacturer is already doing. You can go to a Danish manufacturer in Rockford, Illinois, called Danfoss. Danfoss makes these machines that hook onto another machine. The Danfoss machine, Mr. Speaker, measures the exact amount of energy necessary in order to run the machine right down to the lowest fraction of electrical unit required. It is highly efficient.
No one from Washington called the Danfoss engineers and said, We have an idea for you. We, in Congress, wear pin-striped suits, and we can tell you how to run your manufacturing facility. No one called the city of Rockford years ago and said, We've got a great plan for you where you could take the sewage that you have in the city, turn it into methane and run three turbines so you could help the electrical grid, and there would be many fewer carbons going into the air.
Mr. Speaker, Washington has no news for the American manufacturer or for the American worker except bad news. That's why we have to defeat this. We already have a lot of plans in place. One is the Republican alternative, and that's the one that rewards ingenuity. It makes it a lot easier for people to change to the latest techniques, to scrub the air, to scrub the environment. It just amazes me. It totally amazes me.
We are in Rockford, Illinois, where there is close to 14 percent unemployment. It's the same in Belvidere, Illinois. Our Chrysler plant is closed for 60 days. Chrysler is in bankruptcy. We've gone from 16 million cars sold 2 years ago to 8 million cars sold this year. On top of all of the problems that manufacturing is having, now we need one more--one more regulation, one more requirement, one more chop on the block of the American manufacturer.
It's time to say ``no'' to this big government that thinks it knows best. It's time to say ``no'' to Washington that thinks it has all of the answers. It's time to say ``yes'' to the American worker, ``yes'' to the little inventor, ``yes'' to the American manufacturer--the people who made things with their hands, the people who created all the wealth in the world, the leaders in technology, the leaders in ingenuity--not with the help of government but with the help of their own minds and their own hands.
Would the gentleman yield?
I thank the gentleman.
Perhaps the answer to the number of jobs that would be lost may be found in the draft of the American Clean Energy and Security Act. This is the Cap-and-Trade Act under title IV, if I'm reading this correctly, because it talks about worker transition. Now, that normally means somebody who's lost his job as a result of a government regulation and has to transition to something else. So they already are figuring that some people are going to be losing their jobs.
My gosh, you take a look at the quote of the President. It's going to cost a tremendous amount of money, electricity rates will skyrocket in factories. When you look at the small margin of profit, for example, on castings--already under tremendous pressure from overseas--they won't be around.
But something happened interestingly yesterday at the conference we had in Rockford, Illinois. Dr. Redmond Clark is a Ph.D. in environmental sciences. He's also an inventor and runs a business, and he said this astonishing statement: If American manufacturers, if all of America went to zero carbon emissions, within 7-10 years, the Chinese would more than compensate and put into the air all of the carbon emissions that the Americans had saved. Now, that is how flawed this plan is.
Will the gentlelady yield?
Another shocker that we found out is built into this proposed bill, there is a threshold limit so that the smaller manufacturers--and you don't even have to have a smokestack to be covered by this because buildings naturally emit a carbon dioxide going out through the windows--but the smaller manufacturers would be exempt from cap-and- trade. However, the EPA has now empowered itself to control carbon for greenhouse emissions. So they will be coming in with another layer of regulations even for the smaller ones.
And--and this is almost certain--the EPA, in the past several months, had this proposed standard to tax cows. Any farmer that has a herd in excess of 25 cows--because cows are big methane emitters--$125 per head per year. I don't make that much profit when I sell my beef cattle, even though we haven't done it in the past couple of years.
Washington, D.C. must be its own planet, how people can come up with these absurd ideas. And back home, we have two methane digesters. Some farmers got a little grant from the government to help out, and that's fine, and all of the waste from 300 dairy cattle near Pearl City, Illinois, go into this methane digester, and the methane is recaptured, goes back on the grid. It's enough to run a city of 500 homes. It's amazing.
How is it that people that know so little about manufacturing can, overnight, come up with the idea that they are the experts on green manufacturing as if American manufacturers were doing nothing to increase productivity?